2014 Ufs3 hwk latest setup v02.03.00.05 free download

hwk update client v02.03.00.05 download

Release 10//03/2014

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite.


SAMs V 2.3.0.3
--------------
SWIFT-AEROFONE
E1500 added (PUNL,PIM,FL)
S3330,S5270Y added (UNL,SECT,IM,FL)
ANDROID
More Products and Features added.
UFST only, see separate Document.
COMMON
Fixed bugs (Long time of DHLT & Keys Calc, USB HDD issue, ...)


Customers who are experiencing the panel hanging on "check box" or "update box", should try to use the older driver and see if the problem is gone.
How to install older driver.
1. Make sure your UFSx device is not connected to your PC.
2. Right click "My Computer" and "select Manage"
3. Click "Universal Serial Bus controllers"
4. Right click "UFSx Device, (c) SarasSoft" and select "Uninstall"
5. Right click your computer name at the top of the list and select "Scan for hardware changes"
6. When the Hardware Wizard opens, Select "No, not this time" and then Click "Next"
7. Select "Install from a list or specific location (Advanced)" and then Click "Next"
8. Make sure "Search for the driver in these locations" is selected, "Search removable media ..." is deselected and "Include this location in the search:" is selected
9. Click "Browse" and either:-
for x86 Windows - C:\Program Files\SarasSoft\UFS\UFS_USB_Driver\OLD
for x64 Windows - C:\Program Files (x86)\SarasSoft\UFS\UFS_USB_Driver\OLD
10.Click "Next", click "Continue anyway" to any messages and then "Finish"
You have now installed the old driver, when you run UFS_Panel, you should see these driver versions:-
Versions: Ufs2xx.dll 3.1.19, Ufs2xx.sys 2.6.0
if you see
Versions: Ufs2xx.dll 3.2.7, Ufs2xx.sys 2.8.30
then you are still using the latest drivers and you should try the above process again.


Many thanks to all those who have supported us!!!

---

UFSx_Support_Suite_Setup_v02.03.00.05.exe - UFSx_Support_Suite_Setup_v02.03.00.05.exe

4Shared Link

DHLT Files - Samsung Fast Code Calc Tables

_DHT.part01.exe - _DHLT.part01.exe - _DHLT.part01.exe
_DHT.part02.rar - _DHLT.part02.rar - _DHLT.part02.rar
_DHT.part03.rar - _DHLT.part03.rar - _DHLT.part03.rar
_DHT.part04.rar - _DHLT.part04.rar - _DHLT.part04.rar
_DHT.part05.rar - _DHLT.part05.rar - _DHLT.part05.rar
_DHT.part06.rar - _DHLT.part06.rar - _DHLT.part06.rar
_DHT.part07.rar - _DHLT.part07.rar - _DHLT.part07.rar


1. Uninstall ALL previous versions, you MUST uninstall HWK Suite BEFORE trying to uninstall HWK Support Suite Setup.
2. Install UFSx Support Suite Setup
3. Connect your UFSx+HWK before running the UFSx Control Panel
4. Run UFSx Control Panel
5. Switch to the "Hardware" Tab
6. If you only have one UFSx connected it will be selected, if more than one, select the check box next to the required UFSx. You can click "Scan Boxes" to refresh the list if you have connected further boxes since opening the Control Panel
7. Click "Check Box"
8. Click "Update Box"
9. Click "Check Box" - Make sure "Box Status" = "True" or "Bad Software" and "Server Status" = "Support Ok", before proceeding
10. Switch to the "Software" Tab
11. Amend "Application Install Path" and/or "Nokia Install Path", if required.
12. Click "Check Server"
13. Click "Install"
14. If you have more than 1 UFSx+HWK run steps 5-13 for each UFSx+HWK (NOTE: You must install something at step 13)


How to install same UFSx+HWK to 2nd PC.

Same as above and you must complete ALL steps.


How to add further UFSx+HWK after initial install.

Steps 4-13 as above


DHLT Files
Should be extracted and installed too:-
C:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT for 32bit PCs
C:\Program Files (x86)\SarasSoft\UFS\UFS_SAMs\_DHT for 64bit PCs